4x Baofeng UV-5R III Tri-Band Walkie Talkies | Four-Person Team Ham Radio UK
Baofeng

★ 4x Baofeng UV-5R III Tri-Band Team Pack Highlights:
- Four-Radio Flexible Pack: The most versatile tri-band team size — deploy as one team of four, two pairs, or one coordinator plus three field operatives.
- Tri-Band Operation: 136–174MHz (VHF) + 220–260MHz (1.25M) + 400–520MHz (UHF) — all three bands on every radio.
- 128 Programmable Channels: 50 CTCSS & 104 DCS codes — programme all four radios from one saved CHIRP file.
- 5W Output Power: High/Low switchable on all four units for range vs. battery balance.
- FM Radio Reception: 65–108MHz FM broadcast reception on every unit.
- Dual Watch & Standby: Monitor two frequencies simultaneously across different bands on each radio.
- VOX Hands-Free: Voice-activated transmission on all four units — no button press needed.
- Built-in LED Flashlight: Torch on every unit for low-light field use.
- CHIRP Compatible: Programme all four radios to an identical channel plan via PC in one session.
4x Baofeng UV-5R III — The Most Versatile Tri-Band Team Pack for UK Operations
The 4x Baofeng UV-5R III is the most flexible tri-band team radio configuration available. Four radios gives your operation the ability to function as a complete four-person team on a single shared channel, split into two independent pairs on separate private channels, or deploy as a command radio with three field operatives — all from the same four-unit pack, all programmable via a single CHIRP session.
Every UV-5R III in this pack covers all three bands — VHF (136–174MHz), 1.25M (220–260MHz), and UHF (400–520MHz) — giving your team the flexibility to switch between bands as your operational environment changes. Move from an open UK hillside (VHF advantage) to an indoor venue (UHF advantage) without changing radios or re-programming. All four units switch bands simultaneously at the press of a button.
With 128 programmable channels across three bands, the UV-5R III 4-pack gives you more channel flexibility than almost any other radio at this price point in the UK. Programme your entire team channel plan — all channels, CTCSS/DCS codes, and repeater offsets — using the free CHIRP software and load it to all four radios in under 10 minutes.
4 UV-5R III Radios — Three Powerful Team Configurations
Config 1: Full Team of 4
- All 4 units on Channel 1
- Single shared team channel
- Everyone hears everything
- Simplest setup — ideal for new users
Config 2: Two Pairs
- Pair A: 2 units on Channel 1
- Pair B: 2 units on Channel 2
- Channel 3: all-team broadcast
- Ideal for two-zone operations
Config 3: Command + Field
- 1 command radio — all channels
- 3 field radios — Channel 1
- Command monitors all channels
- Ideal for security & site ops
Programming Tip: Programme all channel configurations — team channel, pair channels, and command channel — into all four radios from a single CHIRP file. Each operator simply selects their required channel from the radio's memory. All configurations are available on every radio at all times. Takes under 10 minutes to set up via Baofeng USB programming cable and CHIRP.


Three Bands — All Four Radios, Complete Coverage
Band 1 — VHF (2m)
136–174MHz — TX & RX
Superior open-terrain range across all 4 radios — ideal for UK countryside, hills & large outdoor sites.
Band 2 — 1.25M
220–260MHz — TX & RX
Exclusive third band — less congested than 2m & 70cm in most UK areas. Available on all 4 radios.
Band 3 — UHF (70cm)
400–520MHz — TX & RX
Better building penetration across all 4 radios — ideal for indoor UK operations & urban environments.
Also receives: FM Broadcast 65–108MHz on all four radios — monitor local UK radio stations in the background while keeping all three bands active on standby simultaneously.
Key Features of the Baofeng UV-5R III
- Earpiece / Mic Type: Kenwood K-Type 2-Pin Plug
- Antenna: SMA-Female, High Gain Tri-Band
- Frequency Range: 136–174MHz (VHF) / 220–260MHz (1.25M) / 400–520MHz (UHF)
- FM Receive Only: 65–108MHz
- Dual-Band Display, Dual Frequency Display, Dual Standby
- Output Power: 5W (High) / 1W (Low)
- 128 Channels, 50 CTCSS & 104 DCS codes
- Built-in VOX (Voice-Activated Transmission)
- 1750Hz Burst Tone for repeater access
- Built-in LED Flashlight
- Large LCD Display
- High/Low RF Power Switchable
- 25KHz / 12.5KHz Bandwidth Switchable
- Emergency Alert Function
- Low Battery Alert
- Battery Saver Mode
- Time-Out Timer (TOT)
- Keypad Lock
- Busy Channel Lock-Out (BCLO)
- Monitor / Scan Function
- Channel Step: 2.5 / 5 / 6.25 / 10 / 12.5 / 25KHz
- Roger Beep
- DTMF Tone Sending
- CTCSS / DCS / DTMF Group Tone Support


Baofeng UV-5R III Technical Specifications
| General | |
| Model | UV-5R III |
| Frequency Range (TX/RX) | 136–174MHz (VHF) / 220–260MHz (1.25M) / 400–480MHz (UHF) |
| FM Receive Only | 65–108MHz |
| Channels | 128 |
| Frequency Stability | ±2.5ppm |
| Antenna | SMA-Female, High Gain Tri-Band |
| Antenna Impedance | 50Ω |
| Operating Voltage | DC 7.4V |
| Operation Mode | Simplex / Semi-Duplex |
| Dimensions (W x H x D) | 100 x 52 x 32mm |
| Weight | 250g per unit (including battery & antenna) |
| Transmitter | |
| Output Power | 4W (High) / 1W (Low) — Max 5W |
| Modulation Mode | 16kφF3E (Wide) / 11kφF3E (Narrow) |
| Maximum Deviation | <5kHz (Wide) / <2.5kHz (Narrow) |
| Spurious Radiation | <7μW |
| Adjacent Ch. Power | ≤-65dB (Wide) / ≤-60dB (Narrow) |
| Pre-Emphasis | 6dB |
| Current | ≤1.6A (5W) |
| CTCSS/DCS Deviation | 0.5±0.1kHz (Wide) / 0.3±0.1kHz (Narrow) |
| Intermediation Sensitivity | 8–12mV |
| Intermediation Distortion | <10% |
| Receiver | |
| Sensitivity (12dB SINAD) | ≤0.20μV |
| Selectivity | 55dB / 50dB |
| Intermodulation | ≥65dB |
| Adjacent Channel Selectivity | ≥60dB |
| Spurious Response | ≥60dB |
| Audio Power Output | 1000mW |
| Battery | |
| Battery | 7.4V 1800mAh Li-ion (BL-5) — per unit |
| Charger | Desktop Drop-In Charger with USB Connector — per unit |
What's in the Box — x4 of Every Item
- 4 x Baofeng UV-5R III Tri-Band Walkie Talkie (Black)
- 4 x 7.4V 1800mAh Original Baofeng Li-ion Battery Pack
- 8 x Antenna (2 stock antennas per radio)
- 4 x Hand Strap
- 4 x Belt Clip
- 4 x English User Manual
- 4 x Desktop Charger with USB Connector
- 4 x PTT Earpiece
Programming All Four UV-5R III Radios
▶ Recommended: Programme All 4 Radios via CHIRP — One File, Four Radios
For a 4-radio team pack, PC programming is the most efficient approach. Use the free CHIRP software or official Baofeng CPS software with an original Baofeng USB programming cable. Programme the first radio with your complete tri-band channel plan — all 128 channels, CTCSS/DCS codes, repeater offsets, and power settings. Save the file, then load the identical configuration to the remaining three radios in under 2 minutes each. All four radios fully configured in approximately 10–15 minutes.
▶ Read the full step-by-step guide: How to Program Your Baofeng Radio Using CHIRP
Manual Keypad Programming — Simplex Channel
- Press [VFO/MR] to enter Frequency Mode.
- Press [A/B] — select the A Side (upper display). B Side entries will not be saved.
- Press [BAND] to select your band — 136MHz (VHF) or 470MHz (UHF).
- Disable TDR:
[MENU] 7 [MENU] → OFF [MENU] [EXIT] - Enter your frequency via the numeric keypad.
- Optional — CTCSS:
[MENU] 13 [MENU] [code] [MENU] [EXIT]or DCS:[MENU] 12 [MENU] [code] [MENU] [EXIT] - Assign to channel:
[MENU] 27 [MENU] [channel number] [MENU] [EXIT]
Manual Keypad Programming — Repeater Channel
- Press [VFO/MR] and select A Side via [A/B].
- Press [BAND] to select your frequency band.
- Optional — Clear existing tones: RX DCS
[MENU] 10, RX CTCSS[MENU] 11, TX DCS[MENU] 12, TX CTCSS[MENU] 13— all set to OFF. - Disable TDR:
[MENU] 7 [MENU] → OFF [MENU] [EXIT] - Optional — Delete existing channel:
[MENU] 28 → [channel] [MENU] [EXIT] - Enter the repeater output frequency via keypad.
- Enter repeater offset:
[MENU] 26 [MENU] [offset] [MENU] [EXIT] - Enter TX shift:
[MENU] 25 [MENU] [1 = positive / 2 = negative] [MENU] [EXIT] - Optional — Enter TX CTCSS/DCS access tone.
- Assign RX frequency:
[MENU] 27 [MENU] [channel number] [MENU] [EXIT] - Press [*Scan] — Reverse Mode — displays TX frequency.
- Assign TX frequency:
[MENU] 27 [MENU] [same channel] [MENU] [EXIT] - Press [*Scan] to exit Reverse Mode.
Recommended Accessories for Your UV-5R III Four-Radio Pack
- ▶ Speaker Mic — Handheld shoulder mic for hands-free communication — one per radio recommended for professional teams.
- ▶ Programming Cable — Programme all 128 channels on all 4 radios from one saved CHIRP file.
- ▶ Bluetooth Programming Adapter — Programme all four UV-5R III radios wirelessly from your smartphone.
- ▶ View All Baofeng Accessories
Who Uses the 4x Baofeng UV-5R III Pack in the UK?
The UV-5R III 4-pack is trusted by UK teams who need flexible, structured tri-band communication across four people or operational zones:
Frequently Asked Questions (FAQ)
Q: Why is 4 radios the most flexible UV-5R III team configuration?
A: Four radios is the minimum quantity that supports genuine multi-channel structured operation. You can deploy all four as a single team, split into two independent pairs, or use a 1+3 command structure — all from the same four units without purchasing additional radios. Four also divides perfectly into pairs, making it the most versatile small team size for UK professional operations that may need to split and regroup.
Q: Can I split the 4 radios into two independent pairs on separate channels?
A: Yes — this is one of the most useful features of the 4-radio pack. Programme Channel 1 for Pair A and Channel 2 for Pair B, with Channel 3 as a shared all-team broadcast. Use different CTCSS/DCS codes on each channel to keep each pair's conversations private. Using CHIRP, this entire configuration is programmed into all four radios from one saved file in a single session. Each operator selects their channel from the radio's memory.
Q: How do I programme all four radios to the same channel plan?
A: Use an original Baofeng USB programming cable with the free CHIRP software. Programme the first radio with your complete multi-channel tri-band plan, save the file, then load it to the remaining three radios — under 2 minutes each. All four configured in approximately 10–15 minutes. Full guide: How to Program Your Baofeng Radio Using CHIRP.
Q: What makes the UV-5R III different from the standard UV-5R?
A: The key difference is the additional 220–260MHz (1.25 metre) band available on all four units. The standard UV-5R covers VHF (2m) and UHF (70cm). The UV-5R III adds a third band — making it a genuine tri-band radio. All other core features remain identical to the UV-5R platform.
Q: Is the UV-5R III legal to use in the UK?
A: Legal to own and receive on without a licence. To transmit, you require a valid UK Amateur Radio (Ham) Licence or a UK Business Radio Licence issued by Ofcom. Not authorised for PMR446 licence-free channels. See our guide: UK Ham Radio Licences — Your Complete Guide.
Q: Do all four radios work on UK amateur repeaters?
A: Yes — with a valid UK Amateur Radio Licence, all four UV-5R III units can access UK repeaters on the VHF (2m) and UHF (70cm) bands. Programme the repeater input/output frequency, CTCSS access tone, and shift offset into all four radios from one saved CHIRP file — all four access the same repeaters simultaneously. Manual repeater programming steps are included in the programming section above.
Q: VHF vs UHF — which band works best for a 4-radio UK team?
A: VHF (136–174MHz) delivers superior range in open outdoor UK environments — countryside, construction sites, large events. UHF (400–520MHz) provides better building penetration for indoor UK operations — hotels, warehouses, shopping centres. The 1.25M band (220–260MHz) is less congested in most UK areas. Programme channels on all three bands across all four radios for complete operational flexibility. Read more: VHF vs UHF — Which is Better?
Helpful Resources
- ▶ How to Program Your Baofeng Radio Using CHIRP — Step-by-Step Guide
- ▶ Download CHIRP — Free Radio Programming Software
- ▶ Download Official Baofeng CPS Programming Software
- ▶ UK Radio Licences — Ofcom Official Licensing
- ▶ VHF vs UHF — Which is Better? Full UK Guide
- ▶ UK Ham Radio Licences, Bands & Gear — Your Guide from Foundation to First Contact
Need a Different Pack Size? Choose Your UV-5R III Team Size
All UV-5R III units are fully compatible — grow your team fleet at any time using the same saved CHIRP channel file:
UK LEGAL NOTICE: LICENCE REQUIRED TO TRANSMIT
IMPORTANT: The Baofeng UV-5R III is not a PMR446 licence-free radio. To transmit on its frequencies within the UK, you must hold a valid UK Amateur Radio (Ham) Licence or a UK Business Radio Licence issued by Ofcom. Transmitting without a licence is illegal and may result in prosecution. Receiving (listening only) is permitted without a licence. Please ensure you comply with all current UK radio licensing regulations before transmitting.
Reviews
-
Work perfectly with other brands
It can work well with my radios from another brand. Dual channels make it easy to use.