BAOFENG UV-5R III Tri-Band 5W Walkie Talkie + Speaker Mic + USB Cable
Baofeng

★ UV-5R III + Speaker Mic + USB Cable Bundle Highlights:
- Complete Professional Kit: Tri-band radio, hands-free speaker mic & USB programming cable — everything in one box.
- Speaker Mic Included: Original Baofeng K-Type shoulder mic — hands-free PTT for security, events & site operations.
- USB Programming Cable Included: Official Baofeng cable for full PC channel programming via CHIRP or CPS software.
- Tri-Band Operation: 136–174MHz (VHF) + 220–260MHz (1.25M) + 400–520MHz (UHF) — three bands in one radio.
- 128 Programmable Channels: 50 CTCSS & 104 DCS codes — configurable in minutes via included USB cable.
- 5W Output Power: High/Low switchable across all three bands.
- FM Radio Reception: 65–108MHz — monitor broadcasts while keeping radio channels active on standby.
- VOX Hands-Free: Voice-activated transmission — works alongside speaker mic for full hands-free operation.
- CHIRP Compatible: Programme all 128 channels from PC in minutes using the included USB cable.
UV-5R III + Speaker Mic + USB Cable: The Complete Tri-Band Professional Kit
The Baofeng UV-5R III with Speaker Mic and USB Programming Cable is the definitive ready-to-deploy tri-band kit for UK professionals. This bundle solves the three most important setup and operational needs in one package — a tri-band radio covering VHF, 1.25M, and UHF, a hands-free speaker mic for comfortable professional communication, and a USB programming cable for fast, accurate channel configuration via PC.
Whether you're a UK amateur radio operator setting up tri-band repeater access, a security team manager deploying radios across a large venue, or an outdoor expedition coordinator who needs a field-ready radio from day one — this kit gives you everything required to go from unboxing to fully operational in under 20 minutes. No additional accessories to source. No manual keypad programming errors. Just plug in the USB cable, load your channels via CHIRP, clip on the speaker mic, and your tri-band radio is ready.
Buying the speaker mic and programming cable separately costs more and wastes time. This bundle provides the full UV-5R III professional experience at the best combined value available in the UK.
Why This Bundle is the Smart Choice for UK Tri-Band Users
UV-5R III Radio
- Three bands — VHF, 1.25M, UHF
- 128 programmable channels
- 5W output power
- FM broadcast reception
- Dual watch & standby
Speaker Mic
- Clip to collar or epaulette
- PTT button within thumb reach
- Hear calls without lifting radio
- Kenwood K-Type 2-pin — plug & play
- Essential for security & events
USB Programming Cable
- Set all 128 channels in minutes
- CTCSS/DCS & repeater offsets via PC
- Works with CHIRP & Baofeng CPS
- Save & replicate channel plans
- No manual keypad entry errors
Pro Tip: Programme your tri-band channel plan on the first radio via CHIRP, save the file, then load it to every additional radio in your fleet in under 2 minutes each. The speaker mic and USB cable make the UV-5R III the most operationally complete tri-band radio available in the UK at this price point.


Tri-Band Frequency Coverage — Three Bands, One Radio
Band 1 — VHF (2m)
136–174MHz — TX & RX
Superior open-terrain range — ideal for UK countryside, hillsides & large outdoor sites.
Band 2 — 1.25M
220–260MHz — TX & RX
Exclusive third band — less congested than 2m & 70cm in most UK areas.
Band 3 — UHF (70cm)
400–520MHz — TX & RX
Best for indoor UK use — penetrates buildings & urban structures effectively.
Also receives: FM Broadcast 65–108MHz — monitor local radio stations in the background while keeping all three radio bands active on standby.
Programming Your UV-5R III — USB Cable Included
▶ PC Programming via CHIRP or Baofeng CPS — Cable Included
With the official Baofeng USB programming cable included in this bundle, setting up all 128 channels across all three bands is fast and accurate. Connect the cable to your PC and the UV-5R III's speaker mic port, open the free CHIRP software or official Baofeng CPS software, and programme all channels, CTCSS/DCS tones, repeater offsets, and power settings in a single session — no manual keypad entry required.
▶ Read the full step-by-step guide: How to Program Your Baofeng Radio Using CHIRP
Manual Keypad Programming — Simplex Channel
- Press [VFO/MR] to enter Frequency Mode.
- Press [A/B] — select the A Side (upper display). B Side entries will not be saved.
- Press [BAND] to select your frequency band — 136MHz (VHF) or 470MHz (UHF).
- Disable TDR (Dual Watch):
[MENU] 7 [MENU] → OFF [MENU] [EXIT] - Enter your desired frequency via the numeric keypad.
- Optional — CTCSS:
[MENU] 13 [MENU] [code] [MENU] [EXIT]or DCS:[MENU] 12 [MENU] [code] [MENU] [EXIT] - Assign to channel:
[MENU] 27 [MENU] [channel number] [MENU] [EXIT]
Manual Keypad Programming — Repeater Channel
- Press [VFO/MR] and select A Side via [A/B].
- Press [BAND] to select your frequency band.
- Optional — Clear existing CTCSS/DCS tones: RX DCS
[MENU] 10, RX CTCSS[MENU] 11, TX DCS[MENU] 12, TX CTCSS[MENU] 13— all set to OFF. - Disable TDR:
[MENU] 7 [MENU] → OFF [MENU] [EXIT] - Optional — Delete existing channel data:
[MENU] 28 → [channel number] [MENU] [EXIT] - Enter the repeater output frequency (your receive frequency) via keypad.
- Enter repeater offset:
[MENU] 26 [MENU] [offset] [MENU] [EXIT] - Enter TX frequency shift:
[MENU] 25 [MENU] [1 = positive / 2 = negative] [MENU] [EXIT] - Optional — Enter TX CTCSS/DCS repeater access tone.
- Assign RX frequency to channel:
[MENU] 27 [MENU] [channel number] [MENU] [EXIT] - Press [*Scan] to activate Reverse Mode — display TX frequency.
- Assign TX frequency to same channel:
[MENU] 27 [MENU] [same channel] [MENU] [EXIT] - Press [*Scan] to exit Reverse Mode.


Key Features of the Baofeng UV-5R III
- Earpiece / Mic Type: Kenwood K-Type 2-Pin Plug
- Antenna: SMA-Female, High Gain Tri-Band
- Frequency Range: 136–174MHz (VHF) / 220–260MHz (1.25M) / 400–520MHz (UHF)
- FM Receive Only: 65–108MHz
- Dual-Band Display, Dual Frequency Display, Dual Standby
- Output Power: 5W (High) / 1W (Low)
- 128 Channels, 50 CTCSS & 104 DCS codes
- Built-in VOX (Voice-Activated Transmission)
- 1750Hz Burst Tone for repeater access
- Built-in LED Flashlight
- Large LCD Display
- High/Low RF Power Switchable
- 25KHz / 12.5KHz Bandwidth Switchable
- Emergency Alert Function
- Low Battery Alert
- Battery Saver Mode
- Time-Out Timer (TOT)
- Keypad Lock
- Busy Channel Lock-Out (BCLO)
- Monitor / Scan Function
- Channel Step: 2.5 / 5 / 6.25 / 10 / 12.5 / 25KHz
- Roger Beep
- DTMF Tone Sending
- CTCSS / DCS / DTMF Group Tone Support
Baofeng UV-5R III Technical Specifications
| General | |
| Model | UV-5R III |
| Frequency Range (TX/RX) | 136–174MHz (VHF) / 220–260MHz (1.25M) / 400–480MHz (UHF) |
| FM Receive Only | 65–108MHz |
| Channels | 128 |
| Frequency Stability | ±2.5ppm |
| Antenna | SMA-Female, High Gain Tri-Band |
| Antenna Impedance | 50Ω |
| Operating Voltage | DC 7.4V |
| Operation Mode | Simplex / Semi-Duplex |
| Dimensions (W x H x D) | 100 x 52 x 32mm |
| Weight | 250g (including battery & antenna) |
| Transmitter | |
| Output Power | 4W (High) / 1W (Low) — Max 5W |
| Modulation Mode | 16kφF3E (Wide) / 11kφF3E (Narrow) |
| Maximum Deviation | <5kHz (Wide) / <2.5kHz (Narrow) |
| Spurious Radiation | <7μW |
| Adjacent Ch. Power | ≤-65dB (Wide) / ≤-60dB (Narrow) |
| Pre-Emphasis | 6dB |
| Current | ≤1.6A (5W) |
| CTCSS/DCS Deviation | 0.5±0.1kHz (Wide) / 0.3±0.1kHz (Narrow) |
| Intermediation Sensitivity | 8–12mV |
| Intermediation Distortion | <10% |
| Receiver | |
| Sensitivity (12dB SINAD) | ≤0.20μV |
| Selectivity | 55dB / 50dB |
| Intermodulation | ≥65dB |
| Adjacent Channel Selectivity | ≥60dB |
| Spurious Response | ≥60dB |
| Audio Power Output | 1000mW |
| Battery | |
| Battery | 7.4V 1800mAh Li-ion (BL-5) |
| Charger | Desktop Drop-In Charger with USB Connector |
What's in the Box
- 1 x Baofeng UV-5R III Tri-Band Walkie Talkie (Black)
- 1 x Original Baofeng PTT Speaker Mic (Kenwood K-Type)
- 1 x Official Baofeng USB Programming Cable
- 1 x 7.4V 1800mAh Original Baofeng Li-ion Battery Pack
- 2 x Antenna (stock antenna included)
- 1 x Hand Strap
- 1 x Belt Clip
- 1 x English User Manual
- 1 x Desktop Charger with USB Connector
- 1 x PTT Earpiece
Further Accessories for the UV-5R III
- ▶ Bluetooth Programming Adapter — Programme your UV-5R III wirelessly from your smartphone without a USB cable.
- ▶ View All Baofeng Accessories
Who Uses the UV-5R III + Speaker Mic + Cable Kit in the UK?
This complete professional kit is the preferred choice for UK operators who need tri-band flexibility, hands-free communication, and accurate PC programming in a single purchase:
Frequently Asked Questions (FAQ)
Q: Why buy the Speaker Mic and USB Cable together with the UV-5R III?
A: The speaker mic and USB programming cable are the two most commonly purchased accessories for the UV-5R III — and the most impactful. The speaker mic transforms the radio from a hand-held device into a fully hands-free professional communication tool. The USB cable removes the need for manual keypad programming, allowing you to configure all 128 channels across all three bands accurately and quickly via PC. Buying both together in this bundle saves money over purchasing separately and delivers a complete, operational tri-band setup from day one.
Q: How do I use the Speaker Mic with the UV-5R III?
A: The speaker mic uses the standard Kenwood K-Type 2-pin connector — simply plug it into the side port of the UV-5R III. Clip the mic unit to your collar, shoulder epaulette, or vest. Press the PTT button on the mic body to transmit — no need to reach for the radio. Audio from incoming transmissions plays through the mic's built-in speaker, giving you true hands-free monitoring and transmission.
Q: What is the best software to use with the USB programming cable?
A: Two options are recommended. The free CHIRP software is open-source, natively supports the UV-5R III, and is widely used by the UK amateur radio community. The official Baofeng CPS software provides a full graphical interface for all radio settings and is preferred by professional and commercial users. Both work with the USB cable included in this bundle. Full guide: How to Program Your Baofeng Radio Using CHIRP.
Q: What makes the UV-5R III different from the standard UV-5R?
A: The key difference is the additional 220–260MHz (1.25 metre) band. The standard UV-5R covers VHF (2m) and UHF (70cm). The UV-5R III adds a third band, making it a genuine tri-band radio. All other features — 128 channels, CTCSS/DCS, VOX, FM receive, CHIRP compatibility — are identical to the UV-5R platform.
Q: Is the UV-5R III legal to use in the UK?
A: Legal to own and receive on without a licence. To transmit, you require a valid UK Amateur Radio (Ham) Licence or a UK Business Radio Licence issued by Ofcom. Not authorised for PMR446 licence-free channels. See our guide: UK Ham Radio Licences — Your Complete Guide.
Q: Can I programme UK repeater frequencies using the included USB cable?
A: Yes — this is one of the most practical uses of the included USB cable. Using CHIRP or Baofeng CPS, programme UK repeater input/output frequencies, set the correct CTCSS access tone, and configure the shift offset — accurately and without manual keypad entry errors. This is the most reliable method for tri-band repeater setup on the UV-5R III. Step-by-step repeater programming instructions are included in the programming section above.
Q: VHF vs UHF — which band should I use for my UK operation?
A: VHF (136–174MHz) delivers superior range in open outdoor UK environments — hills, countryside, construction sites. UHF (400–520MHz) penetrates buildings better — ideal for indoor UK operations including hotels, shopping centres, and warehouses. The 1.25M band (220–260MHz) is less congested in most UK areas. The UV-5R III supports all three — programme channels on each for maximum flexibility. Read more: VHF vs UHF — Which is Better?
Helpful Resources
- ▶ How to Program Your Baofeng Radio Using CHIRP — Step-by-Step Guide
- ▶ Download CHIRP — Free Radio Programming Software
- ▶ Download Official Baofeng CPS Programming Software
- ▶ UK Radio Licences — Ofcom Official Licensing
- ▶ VHF vs UHF — Which is Better? Full UK Guide
- ▶ UK Ham Radio Licences, Bands & Gear — Your Guide from Foundation to First Contact
UK LEGAL NOTICE: LICENCE REQUIRED TO TRANSMIT
IMPORTANT: The Baofeng UV-5R III is not a PMR446 licence-free radio. To transmit on its frequencies within the UK, you must hold a valid UK Amateur Radio (Ham) Licence or a UK Business Radio Licence issued by Ofcom. Transmitting without a licence is illegal and may result in prosecution. Receiving (listening only) is permitted without a licence. Please ensure you comply with all current UK radio licensing regulations before transmitting.
Reviews
-
Amazing value
This handset really is incredible for the money. Really can’t fault it at the price. The only issue is that the user guide is a bit poor, but a couple of hours with google and YouTube and you’ll be great to go regardless.
-
Baofeng tri band radio
Being new to amateur radio, I ordered nervously a radio that everyone seemed to be talking about. I have to say that I'm blown away by the features and build quality, all packed into a tiny unit with a genuine 5 watt output (4.8 on my meter). You will not be disappointed